Nationwide Commercial Roofing & Waterproofing info@elitewaterproofing.co.uk
Flat Roofing / Glass-reinforced Waterproofing

GRP Fibreglass Roofing

A comprehensive guide to glass-reinforced plastic roofing, covering its history, construction, material properties, benefits, common defects, installation requirements and refurbishment options.

GRP roofing combines a resin matrix with glass-fibre reinforcement to form a hardened waterproof laminate. Its performance depends on the suitability of the underlying deck, the resin system, workmanship and correct detailing.

Understanding the Material

What Is GRP Roofing?

GRP stands for Glass-Reinforced Plastic, often referred to as fibreglass. It is a composite material manufactured by combining glass fibres with a compatible polymer resin.

In roofing, the resin bonds the glass-fibre reinforcement into a hardened laminate that forms the principal waterproofing layer.

Traditional GRP roofing systems commonly use polyester resins and glass-fibre matting applied onto a prepared structural deck. Alternative resins and more flexible reinforced systems are also available.

Once cured, the laminate forms a relatively rigid protective covering. A compatible finishing or topcoat system helps protect the surface from weathering.

GRP is used on selected flat roofs, extensions, balconies, terraces and other suitably designed waterproofing applications.

A GRP waterproofing membrane should not be confused with the glass-fibre rooflights or translucent profiled sheets found on some industrial roofs. These are different products with different structural and safety characteristics.

Historical Development

The History of GRP and Fibreglass Roofing

GRP emerged from developments in industrial glass production, synthetic resins and composite engineering during the twentieth century.

1800s

Early Glass-fibre Development

Industrial interest in glass fibres developed as manufacturers explored new ways of producing fine glass filaments.

These developments helped establish the foundations for modern fibreglass products.

1930–1945

Modern Glass-fibre Composites

Commercial glass-fibre production and synthetic resin technology enabled the development of practical reinforced plastics.

Their combination produced useful lightweight components with engineered mechanical characteristics.

1950–1970

Industrial GRP Applications

Reinforced plastic composites became established in marine manufacturing, automotive parts, chemical equipment and selected construction products.

1970–1990

Expansion into Construction

Advances in resin manufacturing, reinforcement and protective finishes increased the use of GRP in construction and waterproofing applications.

1990–2010

GRP Flat Roof Systems

Proprietary GRP roofing systems became increasingly established for smaller flat roofs, extensions and other suitable areas in the UK.

Manufacturers developed compatible edge trims, resins, reinforcements and topcoat products.

Today

Modern Reinforced Waterproofing

Contemporary systems include traditional rigid polyester GRP as well as other reinforced resin technologies.

Roof size, movement, environmental exposure, insulation and system certification are important selection factors.

Composite Material Science

What Is GRP Made From?

The mechanical and waterproofing properties of GRP arise from the combination of reinforcement and polymer resin.

01 / RESIN

Polyester Resin

Traditional roofing GRP commonly uses a polyester resin formulation that cures into a hardened polymer matrix.

Resin type and cure requirements depend on the manufacturer's system.

02 / GLASS

Glass-fibre Reinforcement

Glass-fibre matting is incorporated into the resin to reinforce the waterproofing laminate.

The reinforcement helps distribute stresses and improve mechanical properties.

03 / CURING

Resin Curing System

Certain polyester systems require the controlled addition of a specified catalyst or initiator.

Incorrect mixing or application conditions may affect curing and performance.

04 / TOPCOAT

Protective Finish

A compatible topcoat provides the roof's specified external finish and weather protection.

Colours and surface textures vary by system.

05 / DECK

Roof Substrate

Many traditional GRP roofs are applied over approved timber-based decking, commonly particular OSB products.

The board type, thickness, fixing and moisture requirements are system-specific.

06 / DETAILS

Trims and Accessories

Proprietary edge, upstand, gutter and expansion-joint details form an important part of the completed system.

GRP and resin waterproofing are not all the same

Traditional polyester-based fibreglass roofing differs from some flexible, reinforced liquid-applied systems. Their movement capability, compatible substrates and installation requirements must not be assumed identical.

Roofing Engineering

How Is a GRP Flat Roof Constructed?

Traditional GRP roofing is constructed by applying a reinforced resin laminate over a suitable prepared deck, followed by a compatible protective finish.

Typical GRP roof waterproofing layers Schematic only — not a construction specification

Simplified traditional GRP arrangement. A warm-roof design may also incorporate insulation and vapour control beneath the approved waterproofing deck.

01 / SUPPORT

Structural Deck

The supporting structure and substrate must be sound and suitable for the specified GRP system.

02 / LAMINATE

Reinforced Resin Layer

Glass-fibre reinforcement is incorporated into the compatible resin to create the waterproofing laminate.

03 / DETAILS

Edges and Junctions

Approved trims and reinforced details are installed at roof edges, upstands, outlets and junctions.

04 / FINISH

Protective Topcoat

A compatible finishing layer provides the required external protection and appearance.

Deck dryness and movement are critical

Installing traditional GRP onto damp, moving or unsuitable decking may lead to delamination, cracking or joint failure. Deck selection, joint detailing and movement allowances must follow the chosen system's current specification.

Engineering Advantages

Benefits of GRP Fibreglass Roofing

Properly specified GRP systems can provide useful waterproofing properties for suitable roof areas.

01 / CONTINUITY

Continuous Laminate

Site-applied GRP can form a continuous waterproofing covering without regular sheet membrane laps.

02 / COMPOSITE

Reinforced Construction

Glass-fibre reinforcement contributes mechanical properties to the hardened resin laminate.

03 / WEATHER

Weather Protection

Approved laminate and topcoat systems provide resistance to rain and normal roof exposure.

04 / GEOMETRY

Detailing Flexibility

GRP can be formed around selected roof edges, outlets and complex details using compatible system accessories.

05 / FINISH

Appearance

Proprietary topcoats can provide a consistent finish with different colours and approved surface textures.

06 / MAINTENANCE

Repair Potential

Localised defects may be repairable using compatible resin, reinforcement and finishing methods.

Strength does not mean unlimited movement

Traditional GRP can be relatively rigid. Building expansion, contraction and deck movement require appropriate engineering and detailing.

Where GRP Is Used

Common Applications of GRP Roofing

GRP roofing is associated particularly with smaller flat roofs and details, although the suitability of larger installations depends on system design.

Building Extensions

GRP is used for selected extension roofs where the deck, geometry and movement requirements are suitable.

Garages

Many garage flat roofs incorporate proprietary fibreglass waterproofing systems.

Balconies

Certain certified GRP systems are used on balconies, subject to traffic loading, slip resistance and detailing.

Roof Terraces

Suitable reinforced resin assemblies may form part of accessible roof areas when designed for the intended use.

Commercial Extensions

Plant rooms, small roof sections and commercial extensions may use suitable GRP waterproofing.

Specialist Details

Reinforced resin technologies can support selected gutters and other carefully designed waterproofing details.

Material and Installation Defects

Common Problems with GRP Roofing

Problems with GRP roofing can result from substrate movement, moisture, incorrect curing, poor workmanship or unsuitable details.

One important distinction is that a traditional GRP laminate may be strong but comparatively rigid, meaning it must be appropriately designed to accommodate building movement.

Moisture in the underlying deck can contribute to poor bonding and subsequent deterioration.

Inadequate curing, incompatible materials or incorrect application conditions can also compromise the finished waterproofing.

Roof edges, junctions, outlets and areas experiencing movement require particular attention during inspection.

Cracking

Movement of the supporting deck or unsuitable detailing may create cracks in rigid GRP laminates.

Delamination

Poor adhesion, moisture or inadequate preparation can result in laminate separation.

Blistering

Moisture, trapped air or application defects may lead to localised raised areas or voids.

Incorrect Curing

Unsuitable mixing or environmental conditions can affect the curing process.

Topcoat Deterioration

Weather exposure, physical wear and maintenance conditions may affect the external finish.

Failed Roof Details

Defective trims, outlets, parapets and junctions can create routes for water ingress.

Installation and Quality Control

How Is GRP Roofing Installed?

Installation must follow the proprietary system, with particular attention to deck condition, material compatibility, curing and movement details.

STEP 01

Condition Assessment

Examine the roof structure, drainage, deck suitability and moisture condition.

STEP 02

Deck Preparation

Install or prepare the specified deck in accordance with manufacturer guidance.

STEP 03

Edge and Joint Details

Fit suitable trims and address required movement and expansion details.

STEP 04

Reinforced Laminate

Apply compatible resin and reinforcement in accordance with the specified system.

STEP 05

Curing and Finishing

Allow correct curing and apply the approved external finishing or topcoat.

STEP 06

Completion Inspection

Check details, the finished surface, drainage and maintenance requirements.

Weather conditions affect installation

Temperature, moisture, humidity and curing conditions influence resin application. Work should not proceed outside the selected system's approved conditions.

Repair and Refurbishment

Can a GRP Roof Be Repaired?

Some existing GRP roofs can be repaired, but the correct method depends on the extent of damage, the laminate condition and the underlying deck.

01 / INSPECT

Identify the Defect

Locate cracking, failed details, moisture damage and other potential sources of leakage.

02 / ASSESS

Examine the Deck

Determine whether the underlying construction is sound and stable.

03 / PREPARE

Surface Preparation

Suitable preparation may be needed for effective bonding of approved repair materials.

04 / REPAIR

Reinforced Repair

Certain local defects can be treated using compatible resin and fibreglass reinforcement.

05 / FINISH

Topcoat Renewal

Selected weathered finishes may be suitable for compatible topcoat refurbishment.

06 / REPLACE

Roof Reconstruction

Significant movement, severe deterioration or unsuitable decking may make replacement the better approach.

A new topcoat is not a structural repair

Recoating a cracked or delaminated GRP laminate does not automatically address the reason for failure. The underlying cause must be investigated.

Flat Roofing Technologies

GRP Compared with Other Flat Roof Systems

GRP is one of several waterproofing technologies. Each has different material characteristics and suitability requirements.

System Primary Material Typical Construction Key Consideration
GRP Glass-reinforced resin Site-applied reinforced laminate Deck movement, moisture and curing
Torch-on felt Reinforced modified bitumen Compatible bonded membranes Fire safety and seam detailing
Single-ply Polymeric sheet membrane Mechanically fixed, adhered or ballasted system Membrane joints and wind uplift
Silicone Elastomeric silicone coating Compatible liquid-applied coating system Adhesion and substrate condition
Other coatings Various liquid polymer systems Product-specific waterproofing or protection Approval, preparation and intended use
Construction and Property

GRP Roofing in the UK Economy

GRP roofing is one component of the wider British flat roofing, building refurbishment and waterproofing industries.

Residential Extensions

Fibreglass roofs are frequently considered for suitable extensions and smaller roofs.

Commercial Properties

Selected commercial extensions, balconies and detailed roof areas may use GRP waterproofing.

Property Maintenance

Existing GRP roofs create demand for inspections, repairs and refurbishment.

Resin Manufacturing

The wider composites sector supplies reinforcement, resins, additives and specialist materials.

Building Improvements

Flat roof replacement can form part of thermal upgrading and building modernisation projects.

Whole-life Costs

Long-term value depends on roof design, materials, installation, repairs and maintenance.

Health and Safety

Safety When Installing GRP Roofing

GRP roofing presents hazards associated with work at height and the handling of resin materials.

Appropriate edge protection, safe access and controls around fragile roof surfaces are essential.

Certain polyester resin systems can release styrene vapours and involve hazardous initiators or other chemicals.

Product-specific safety data sheets, COSHH assessments, ventilation and appropriate personal protection must be considered.

The reaction and handling of curing chemicals require adherence to the manufacturer's safety instructions.

Working at Height

Plan suitable access, edge protection and fall prevention.

Resin Exposure

Assess chemical exposure using relevant current safety data sheets.

Curing Chemicals

Store, handle and mix system chemicals in accordance with manufacturer instructions.

Roof Fragility

Rooflights and unsound decking require competent assessment and suitable precautions.

Frequently Asked Questions

GRP Fibreglass Roofing FAQs

What does GRP roofing stand for?

GRP means glass-reinforced plastic. The roofing material combines glass-fibre reinforcement with a compatible polymer resin.

Is GRP roofing the same as fibreglass?

In roof construction, GRP is commonly referred to as fibreglass roofing. The precise resin and reinforcement depend on the system.

Does GRP roofing crack?

GRP can crack when subjected to unsuitable deck movement, stresses or incorrect detailing. Proper design must consider those conditions.

Can GRP be installed on an existing felt roof?

Traditional GRP generally requires a compatible prepared substrate and should not simply be applied over old felt without a specifically approved system.

Can a leaking GRP roof be repaired?

Some local defects can be repaired with compatible materials. The underlying deck and cause of leakage must be assessed first.

Is GRP suitable for very large flat roofs?

Suitability depends on the chosen system, roof geometry and movement design. Traditional rigid GRP may require specific expansion details, while other reinforced systems have different capabilities.

How long does GRP roofing last?

There is no universal service life. Performance depends on product specification, deck condition, workmanship, exposure and maintenance.

Technical Guidance

Industry Information and References

This article provides general educational information and is not a GRP installation specification. Current manufacturer instructions, system certification and competent design must be followed.

Educational content prepared: November 2026. Refer to current technical product documentation and applicable regulations.

Elite Waterproofing Limited

Commercial Flat Roof Waterproofing Solutions

Elite Waterproofing provides commercial and industrial flat roof repair, refurbishment and replacement services.

Whether your roof has developed cracking, leakage, deteriorated waterproofing or other defects, contact our team to discuss suitable assessment and available solutions.

Request a Free Quote